Selection guide · 9 exterior window systems
Use the table to shortlist a system by opening mode and reference geometry. The final selection is checked against opening size, glass, wind load, thermal target, hardware, fabrication method and destination standard.
| System | Opening type | Frame depth | Catalogue reference | Selection starting point |
|---|---|---|---|---|
| A65A65 Casement Window | Outward / inward casement | 65 mm | Interface dimension: ≤ 75 mm | Compact casement construction |
| A110A110 Casement Window | Casement | 110.5 mm | Interface dimension: ≤ 120 mm | Deeper frame construction |
| A120A120 Casement Window | Casement | 120.6 mm | Interface dimension: ≤ 130 mm | Cold-region projects requiring a 120.6 mm frame |
| S175S175 Parallel-Projecting Window | Parallel push-out | 175 mm | Sash travel: 250 mm | Controlled ventilation for high-rise or coastal use |
| S132S132 Compression-Seal Window | Compression-seal | 132 mm | Interface dimension: ≤ 142 mm | Flush appearance and multi-layer compression sealing |
| S96NS96N Inward Casement Window | Inward / tilt-and-turn | 96 mm | — | Interior cleaning and tilt ventilation |
| S115S115 Sliding Window | Horizontal sliding | 115 mm | Interface dimension: ≤ 125 mm | Practical residential sliding openings |
| S126S126 Sliding Window | Heavy-duty sliding | 126 mm | Interface dimension: ≤ 96 mm | Large, clean-sightline sliding windows |
| S150S150 Vertical Sliding Window | Vertical lifting | 150 mm | Interface dimension: ≤ 206 mm | Automated or manual vertical openings |
Values are catalogue references, not a performance guarantee. Request the current drawings, BOM and evidence scope before specifying a system.
Product FAQ
Reference answers for early system selection. Final dimensions, components and performance are fixed in the project-specific technical package.
They form a progressively deeper casement range. A65 has a 65 mm frame, A110 uses a 110.5 mm frame, and A120 uses a 120.6 mm frame with a 35.3 mm PA66GF25 thermal barrier. Whole-window thermal performance must be verified for the released construction.
S115 and S126 are horizontal sliding window systems. S150 lifts vertically, while S175 moves outward in parallel and S132 uses a side-pressed closing action. Select by opening geometry as well as load, sealing and hardware requirements.
No. Whole-window performance depends on the complete profile build, thermal breaks, glazing, spacers, seals, dimensions, hardware, joints and installation. Catalogue geometry is only the starting point for qualification.
